What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Were you interested in know-how about How to Troubleshoot and Repair an Electric Water Heater?
Numerous contemporary homes make use of an electrical hot water heater for their heating system, as a result of its comfort as well as simplicity of use. Nevertheless, much like any other electric appliances, problems may emerge with its use, all of a sudden. It can be actually irritating to awaken to a chilly shower instead of a hot one or having your bathroom with water that isn't warm adequate and even as well hot. Whatever the case may be, hot water heater troubles can be fairly stressful. Luckily, we have actually made a listing of possible services to your water heater issues. There are a variety of aspects that might trigger a lot of these problems, maybe a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you switch off the primary power supply for security. Whatever the issue is, getting it repaired ought to not pose too much of an issue if you comply with these steps:
Check Your Power Supply:
As standard as this may seem, it is really needed. Without sufficient power, your water heater will certainly not work. So the first thing to do when your water suddenly retires is to verify that it isn't a power problem. Inspect if the fuse is blown out or the breaker stumbled. If the circuit breaker is the issue, merely transform it off and on again. Change any kind of damaged or worn-out fuse. Check the home appliance with power after these changes to see if it's currently functioning.
Check the Burner in the Hot Water Heater:
If it's not a power issue, then attempt taking a look at your heating element if it is still functioning. Check each of your heating elements to ensure the issue isn't with any of them. If any one of them is defective, change that part and then inspect whether the hot water is back on.
Examine Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot sufficient, you may need to inspect the temperature setups on your upper thermostat. Ensure the breaker is switched off prior to doing anything. Open the accessibility panel as well as press the red switch for temperature reset over the thermostat. This should assist heat the water. Turn the breaker back on and examine if the problem has been settled.
Call An Expert:
If after changing all faulty components and also resetting your temperature, the hot water heater still isn't working, you may require to contact a professional plumber for a specialist opinion. The issue with your heating system could be that the hot and cold taps have actually been switched or it might be undersized for the amount of hot water required in your house. Whatever the case might be, a professional plumber would aid resolve the trouble.
Conclusion
Water heater issues are not constantly major. A number of them result from small issues like a blown fuse or worn-out burner. Changing the malfunctioning components should work. Nevertheless, if you are still incapable to fix the trouble, give a call to your nearest plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our excerpt on How to Troubleshoot and Repair an Electric Water Heater. Thank you so much for taking time to browse our article. Are you aware of another individual who is inquisitive about the topic? Why not share it. Thanks for your time. Visit us again soon.
Services
Report this page